Have you ever looked at a garden pond and wondered how much it would cost to get one installed? With the price of digging out and building a pool in people’s backyard, a garden pond must surely cost quite a bit as well – but the truth is that people tend to make these themselves.
Image via: Pexels
Garden ponds are actually not that difficult to make as you won’t be swimming around in it yourself. Just find a weekend or two where you have all the time you need to get your hands dirty and get started so that you’ll be able to enjoy it before spring.
Here is a handful of tips in terms of building your own garden pond so that your neighbors can be glancing over at your garden with envy.
First: Repurpose or buy
First of all, you need to consider what you’re looking for. The bigger the pond is, the more money you might have to spend on it as smaller ponds easily can be made out of repurposing a very large flower pot or sink a rubber container into your garden. You could sink the flower pot in as well, though, but it will look pretty as it is just standing above the ground.
If you’re not that into repurposing stuff to make a pond out of, there are many alternatives to buy online instead. They will, of course, cost a bit more but may also look even fancier; have a look at this article, for example, to get started and consider your options first.
Keep in mind that any watertight vessel will do, really, so have a look in your garage before you decide on anything final.
Next: Mark out the area
Before you start digging, it’s best to mark out the area where you’d like to have your pond and lay the water circulation pipe that goes from the pump to the waterfall on the ground. Throw some soil on top of it, by the way, to save you the time of digging a trench to bury the pipe.
It’s a good idea to have everything you need for the job ready at hand before you start to do this so have a look at these sump pump prices right away. This will usually be the most expensive thing you have to buy so it’s better to get it over with as soon as possible.
Digging out the pond
After this is over with, you can start to dig out the pond. Terrace both shallow and deeper areas for plants, and remember to remove everything that might puncture your pipes such as sharp rocks, roots, and anything else you might find down there that isn’t pure soil.
Now you can place a layer or your container into the terraced area. If you’re using a liner, remember to simply spread it loosely within the pond and don’t stretch it tight as you might find that you need a bigger sheet.
Line the pond sides with rocks and place the pump container before installing the pump and filling the pond with water. Remember to decorate with some plants, rocks, statues and whatever else you might like.
Now you have a beautiful garden pond to make the time you spend out there even better.